stream_wrapper_unregister
Get the intersection of two strings using array_intersect
<?php
function string_intersect($string1, $string2)
{
$array1 = $array2 = array();
for($i = 0, $j = 0, $s1_len = strlen($string1), $s2_len = strlen($string2);($i < $s1_len) || ($j < $s2_len); $i++, $j++) {
if($i < $s1_len) {
$array1[] = $string1[$i];
}
if($j < $s2_len) {
$array2[] = $string2[$j];
}
}
return implode('', array_intersect($array1, $array2));
}
?>
For more advanced comparison you can use array_uintersect as well.
CLIV. String
Introdução
Todas estas funções manipulam strings de vários meios. Algumas seções mais especializadas podem ser encontradas nas seções de expressões regulares e Funções de URL.
Para informação de como as strings funcionam, especialmente sobre o uso de apóstrofo, aspas e sequências de escape veja Strings na seção Tipos do manual.
Dependências
Nenhuma biblioteca externa é necessária para compilar esta extensão.
Instalação
Não há nenhuma instalação necessária para utilizar estas funções, elas fazem parte do núcleo do PHP.
Constantes pré-definidas
As contantes abaixo são definidas por esta extensão e somente estarão disponíveis quando a extensão foi compilada com o PHP ou carregada dinamicamente durante a execução.
- CRYPT_SALT_LENGTH integer
- CRYPT_STD_DES integer
- CRYPT_EXT_DES integer
- CRYPT_MD5 integer
- CRYPT_BLOWFISH integer
- HTML_SPECIALCHARS (integer)
- HTML_ENTITIES (integer)
- ENT_COMPAT (integer)
- ENT_QUOTES (integer)
- ENT_NOQUOTES (integer)
- CHAR_MAX (integer)
- LC_CTYPE (integer)
- LC_NUMERIC (integer)
- LC_TIME (integer)
- LC_COLLATE (integer)
- LC_MONETARY (integer)
- LC_ALL (integer)
- LC_MESSAGES (integer)
- STR_PAD_LEFT (integer)
- STR_PAD_RIGHT (integer)
- STR_PAD_BOTH (integer)
Veja também
Para funções de manuseio de string mais poderosas, de uma olhada em funções de expressão regular POSIX e funções de expressão regular compatíveis com Perl .
- Índice
- addcslashes -- String entre aspas com barras no estilo C
- addslashes -- Adiciona barras invertidas a uma string
- bin2hex -- Converte um dado binário em hexadecimal
- chop -- Alias de rtrim()
- chr -- Retorna um caracter específico
- chunk_split -- Divide uma string em pequenos pedaços
- convert_cyr_string -- Converte de um caracter cirílico para outro
- convert_uudecode -- Decode a uuencoded string
- convert_uuencode -- Uuencode a string
- count_chars -- Retorna informações sobre os caracteres usados numa string
- crc32 -- Calcula polinômio crc32 de uma string
- crypt -- Único caminho de codificação de string (hashing)
- echo -- Exibe uma ou mais strings
- explode -- Divide uma string em strings
- fprintf -- Escreve uma string formatada para um stream
- get_html_translation_table -- Retorna a tabela de tradução usada por htmlspecialchars() e htmlentities()
- hebrev -- Converte texto lógico Hebraico para texto visual
- hebrevc -- Converte um texto lógico Hebráico para um texto visual com conversão newline
- html_entity_decode -- Converte todas as entidades HTML para os seus caracteres
- htmlentities -- Converte todos os caracteres para HTML entities
- htmlspecialchars_decode -- Convert special HTML entities back to characters
- htmlspecialchars -- Converte caracteres especiais para a realidade HTML
- implode -- Junta elementos de uma matriz em uma string
- join -- Sinônimo de implode()
- levenshtein -- Calcula a distância Levenshtein entre duas strings
- localeconv -- Obtém a informação da formatação numérica
- ltrim -- Retira whitespace do início da string
- md5_file -- Calcula hash md5 de um dado arquivo
- md5 -- Calcula o "hash MD5" de uma string
- metaphone -- Calcula a metaphone key de uma string
- money_format -- Formata um número como uma string de moeda
- nl_langinfo -- Retorna informação de linguagem e local
- nl2br -- Insere quebras de linha HTML antes de todas newlines em uma string
- number_format -- Formata um número com os milhares agrupados
- ord -- Retorna o valor ASCII do caractere
- parse_str -- Converte a string em variáveis
- print -- Mostra uma string
- printf -- Mostra uma string formatada
- quoted_printable_decode -- Converte uma string quoted-printable para uma string de 8 bit
- quotemeta -- Adiciona uma barra invertida antes dos meta caracteres
- rtrim -- Retira espaço em branco do final da string
- setlocale -- Define informações locais
- sha1_file -- Calcula a hash sha1 de um arquivo
- sha1 -- Calcula a hash sha1 de uma string
- similar_text -- Calcula a similaridade entre duas strings
- soundex -- Calcula a chave soundex de uma string
- sprintf -- Retorna uma string formatada
- sscanf -- Interpreta a entrada de uma string de acordo com um formato
- str_ireplace -- Versão que não diferencia maiúsculas e minúsculas de str_replace().
- str_pad -- Preenche uma string para um certo tamanho com outra string
- str_repeat -- Repete uma string
- str_replace -- Substitui todas as ocorrências da string de procura com a string de substituição
- str_rot13 -- Executa a transformação rot13 em uma string
- str_shuffle -- Mistura uma string aleatoriamente
- str_split -- Converte uma string para um array
- str_word_count -- Retorna informação sobre as palavras usadas em uma string
- strcasecmp -- Comparação de strings sem diferenciar maiúsculas e minúsculas segura para binário
- strchr -- Apelido para strstr()
- strcmp -- Comparação de string segura para binário
- strcoll -- Comparação de string baseada no local
- strcspn -- Encontra o tamanho do segmento inicial que não contenha a mascara
- strip_tags -- Retira as tags HTML e PHP de uma string
- stripcslashes -- Desfaz o efeito de addcslashes()
- stripos -- Encontra a primeira ocorrencia de uma string sem diferenciar maiúsculas e minúsculas
- stripslashes -- Desfaz o efeito de addslashes()
- stristr -- strstr() sem diferenciar maiúsculas e minúsculas
- strlen -- Retorna o tamanho de uma string
- strnatcasecmp -- Comparação de strings sem diferenciar maiúsculas/minúsculas usando o algoritmo "natural order"
- strnatcmp -- Comparação de strings usando o algoritmo "natural order"
- strncasecmp -- Comparação de string caso-sensitivo de Binário seguro dos primeiros n caracteres
- strncmp -- Comparação de string segura para binário para os primeiros n caracteres
- strpbrk -- Search a string for any of a set of characters
- strpos -- Encontra a posição da primeira ocorrência de uma string
- strrchr -- Encontra a ultima ocorrência de um caractere em uma string
- strrev -- Reverte uma string
- strripos -- Encontra a posição da última ocorrência de uma string case-insensitive em uma string
- strrpos -- Encontra a posição da última ocorrência de um caractere em uma string
- strspn -- Encontra o comprimento do segmento inicial combinando com a máscara
- strstr -- Encontra a primeira ocorrencia de uma string
- strtok -- Tokeniza uma string
- strtolower -- Converte uma string para minúsculas
- strtoupper -- Converte uma string para maiúsculas
- strtr -- Traduz certos caracteres
- substr_compare -- A comparação binária entre duas strings case-insensitive de um offset é guardada opcionalmente, até o limite do comprimento de caracteres
- substr_count -- Conta o número de ocorrências de uma substring
- substr_replace -- Substitui o texto dentro de uma parte de uma string
- substr -- Retorna uma parte de uma string
- trim -- Retira espaço no ínicio e final de uma string
- ucfirst -- Converte para maiúscula o primeiro caractere de uma string
- ucwords -- Converte para maiúsculas o primeiro caractere de cada palavra
- vfprintf -- Write a formatted string to a stream
- vprintf -- Mostra uma string formatada
- vsprintf -- Retorna uma string formatada
- wordwrap -- Quebra uma string em linhas usando um caractere de quebra de linha.
add a note
User Contributed Notes
String
Tomek Rychtyk
08-Feb-2012 09:58
Peter -the pete- de Pijd
14-Oct-2009 05:01
get the intersection of two strings; may not have optimal performance
<?php
function mb_string_intersect($string1, $string2, $minChars = 5)
{
assert('$minChars > 1');
$string1 = trim($string1);
$string2 = trim($string2);
$length1 = mb_strlen($string1);
$length2 = mb_strlen($string2);
if ($length1 > $length2) {
// swap variables, shortest first
$string3 = $string1;
$string1 = $string2;
$string2 = $string3;
$length3 = $length1;
$length1 = $length2;
$length2 = $length3;
unset($string3, $length3);
}
if ($length2 > 255) {
return null; // to much calculation required
}
for ($l = $length1; $l >= $minChars; --$l) { // length
for ($i = 0, $ix = $length1 - $l; $i <= $ix; ++$i) { // index
$substring1 = mb_substr($string1, $i, $l);
$found = mb_strpos($string2, $substring1);
if ($found !== false) {
return trim(mb_substr($string2, $found, mb_strlen($substring1)));
}
}
}
return null;
}
echo mb_string_intersect("hello spencer", "hey spencer how are you?"); // output "spencer"
?>
Stephen Dewey
19-Nov-2008 05:33
If you want a function to return all text in a string up to the Nth occurrence of a substring, try the below function.
Works in PHP >= 5.
(Pommef provided another sample function for this purpose below, but I believe it is incorrect.)
<?php
// Returns all of $haystack up to (but excluding) the $n_occurrence occurrence of $needle. Therefore:
// If there are < $n_occurrence occurrences of $needle in $haystack, the entire string will be returned.
// If there are >= $n_occurrence occurrences of $needle in $haystack, the returned string will end before the $n_occurrence'th needle.
// This function only makes sense for $n_occurrence >= 1
function nsubstr($needle, $haystack, $n_occurrence)
{
// After exploding by $needle, every entry in $arr except (possibly) part of the last entry should have its content returned.
$arr = explode($needle,$haystack,$n_occurrence);
// Examine last entry in $arr. If it contains $needle, cut out all text except for the text before $needle.
$last = count($arr) - 1;
$pos_in_last = strpos($arr[$last],$needle);
if ($pos_in_last !== false)
$arr[$last] = substr($arr[$last],0,$pos_in_last);
return implode($needle,$arr);
}
$string = 'd24jkdslgjldk2424jgklsjg24jskgldjk24';
print 'S: ' . $string . '<br>';
print '1: ' . nsubstr('24',$string,1) . '<br>';
print '2: ' . nsubstr('24',$string,2) . '<br>';
print '3: ' . nsubstr('24',$string,3) . '<br>';
print '4: ' . nsubstr('24',$string,4) . '<br>';
print '5: ' . nsubstr('24',$string,5) . '<br>';
print '6: ' . nsubstr('24',$string,6) . '<br>';
print '7: ' . nsubstr('24',$string,7) . '<br>';
/*
// prints:
S: d24jkdslgjldk2424jgklsjg24jskgldjk24
1: d
2: d24jkdslgjldk
3: d24jkdslgjldk24
4: d24jkdslgjldk2424jgklsjg
5: d24jkdslgjldk2424jgklsjg24jskgldjk
6: d24jkdslgjldk2424jgklsjg24jskgldjk24
7: d24jkdslgjldk2424jgklsjg24jskgldjk24
*/
?>
Note that this function can be combined with wordwrap() to accomplish a routine but fairly difficult web design goal, namely, limiting inline HTML text to a certain number of lines. wordwrap() can break your string using <br>, and then you can use this function to only return text up to the N'th <br>.
You will still have to make a conservative guess of the max number of characters per line with wordwrap(), but you can be more precise than if you were simply truncating a multiple-line string with substr().
See example:
<?php
$text = 'Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida accumsan, enim quam condimentum est, vitae rutrum neque magna ac enim.';
$wrapped_text = wordwrap($text,100,'<br>',true);
$three_lines = nsubstr('<br>',$wrapped_text,3);
print '<br><br>' . $three_lines;
$four_lines = nsubstr('<br>',$wrapped_text,4);
print '<br><br>' . $four_lines;
/*
prints:
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Pellentesque id massa. Duis sollicitudin
ipsum vel diam. Aliquam pulvinar sagittis felis. Nullam hendrerit semper elit. Donec convallis
mollis risus. Cras blandit mollis turpis. Vivamus facilisis, sapien at tincidunt accumsan, arcu
dolor suscipit sem, tristique convallis ante ante id diam. Curabitur mollis, lacus vel gravida
*/
?>
kriskra at gmail dot com
04-Aug-2008 04:10
In reference to Moe... best random string function
<?php
function random_string($l = 10){
$c = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxwz0123456789";
for(;$l > 0;$l--) $s .= $c{rand(0,strlen($c))};
return str_shuffle($s);
}
?>
Salomon
28-Mar-2008 02:43
If you want to indent a block of text with $level tabs, you can use
function str_indent($level, $text) {
return str_repeat("\t", $level).str_replace("\n", "\n".str_repeat("\t", $level), $text);
}
Verdauga
19-Mar-2008 06:06
Just a note in regards to bloopletech a few posts down:
The word "and" should not be used when converting numbers to text. "And" (at least in US English) should only be used to indicate the decimal place.
Example:
1,796,706 => one million, seven hundred ninety-six thousand, seven hundred six.
594,359.34 => five hundred ninety four thousand, three hundred fifty nine and thirty four hundredths
geek dot de at gmail dot com
07-Jan-2008 03:18
This took me quite some time to figure out and it is so obvious. So, I hope it helps someone out there like it would have helped me if I would have found it on this page:
I wanted to read a binary file and write it out with some modified bytes with their hex values. The easiest way I could come up with was the following:
read the file line by line, e.g. 400 bytes and then chuck it into an array with e.g.
<?php
$handle = @fopen("/path/to/file.bin", "r");
if ($handle) {
while (!feof($handle)) {
$buffer[] = fgets($handle, 400);
}
fclose($handle);
$buffer[0][0] = chr(hexdec("FF")); // set the first byte to 0xFF
}
// write out the file from the array ...
?>
One could write a function for that, so that One can write a string of bytes. Don't have time for this now but you should get the idea.
m
26-Jul-2007 05:10
Regarding the code for the function beginsWith($str, $sub), I found that it has problems when only one character is present after the string searched for. I found that this works better instead:
<?php
function beginsWith($str, $sub) {
return (strncmp($str, $sub, strlen($sub)) == 0);
}
?>
Moe
10-Jul-2007 06:44
In responce to mike here is a better random string function
<?php
function random_string($max = 20){
$chars = "abcdefghijklmnopqrstuvwxwz0123456789_";
for($i = 0; $i < $max; $i++){
$rand_key = mt_rand(0, strlen($chars));
$string .= substr($chars, $rand_key, 1);
}
return str_shuffle($string);
}
?>
mike "eyes" moe
17-Jun-2007 05:59
Here is a truly random string generator it uses the most common string functions it will work on anywhere.
<?php
function random_string($max = 20){
$chars = explode(" ", "a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9");
for($i = 0; $i < $max; $i++){
$rnd = array_rand($chars);
$rtn .= base64_encode(md5($chars[$rnd]));
}
return substr(str_shuffle(strtolower($rtn)), 0, $max);
}
?>
bloopletech at gmail dot com
22-May-2007 06:05
[Editor's Note: Remember that number names are locale-specific. Thus in the US 1,000,000,000 is called a billion, while in other countries this might be different (ie. miljard in Dutch). This function provides support only for the US locale]
If you want to convert a number, (int or float) to full spoken text, then you can use my num2text converter, at http://bloople.net/num2text
Examples:
40000 => forty thousand
1,796,706 => one million, seven hundred and ninety-six thousand, seven hundred and six.
If works for positive an negative integers/floats/doubles. The code is only a page long, and you don't have to install any modules or anything.
I hope this comes in handy for somebody!
benjamin at webbutvecklarna dot se
25-Mar-2007 04:23
An update to admin at fivestarbuy dot com's StrParse. Since php5.2.x the occurance of an object in the vardata will cause a "Catchable fatal error". Previously it has failed silently, so I added nullification of present objects.
I also updated comments to be more specific, I hope that's ok with you, admin at fivestarbuy dot com:
<?php
function StrParse($str,$vardata) {
# Variables present in $str is replaced by values of variables in $vardata
# typical use:
# $vardata = get_defined_vars();
# $str = some template code with variables present.
# uncomment the echo line to debug.
$getvarkeys=array_keys($vardata);
$ret=$str;
for ($x=0; $x < count($getvarkeys); $x++) {
$myvar=$getvarkeys[$x];
if(is_object($vardata[$myvar])) $vardata[$myvar] = null;
#echo "Variable: " . $myvar . " [" . $vardata[$myvar] . "]<br>";
$ret=str_replace('$' . $myvar, $vardata[$myvar], $ret);
}
return $ret;
}
?>
beggining pro
02-Aug-2006 11:00
Well for you egold users out ther I wrote this to just return the balance ONLY
If anyone knows a better way to write this lemme know as im a novice
function _GetBalance($from, $frompass) {
$defined_vars = get_defined_vars();
$_url = 'https://www.e-gold.com/acct/balance.asp';
$_url_p = "AccountID=" . $from . "&PassPhrase=" . $frompass ."";
$ch = curl_init();
curl_setopt($ch, CURLOPT_POST,1);
curl_setopt($ch, CURLOPT_POSTFIELDS,$_url_p);
curl_setopt($ch, CURLOPT_URL,$_url);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 2);
curl_setopt($ch, CURLOPT_USERAGENT, $defined_vars['HTTP_USER_AGENT']);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
$content = curl_exec ($ch);
curl_close ($ch);
$content=strtolower($content);
$content=strstr($content,"</select></font></th></form></tr>");
$content=strip_tags($content);
$content=strrev($content);
$content=strstr($content,"eseht :eton");
$content=str_replace("eseht :eton","",$content);
$content=ltrim($content);
$content=rtrim($content);
$content=substr($content,0,11);
$content=strrev($content);
$content=ltrim($content);
return $content;
}
admin at rotarymulundeast dot org
30-Jul-2006 03:16
Here's an easier way to find nth...
function nth($numbex){
if ($numbex%10 == 1 && $numbex%100 != 11) $sth='st';
elseif ($numbex%10 == 2 && $numbex%100 != 12) $sth='nd';
elseif ($numbex%10 == 3 && $numbex%100 != 13) $sth='rd';
else $sth = 'th';
return $sth;
}
there is is no need to check if the user has entered a non-integer as we may be using this function for expressing variables as well eg. ith value of x , nth root of z ,etc...
heavyraptor
27-Jul-2006 08:17
I think that
administrador(ensaimada)sphoera(punt)com's function is
too complicated. It's easier with regular expressions.
So I made this function, it isn't really the same,
it's even better because it returns an array with all the
matches found
If there are no matches, false is returned.
<?php
// bool/array str_between( string str, string
start_str, string end_str )
function str_between($str,$start,$end) {
if (preg_match_all('/' . preg_quote($start) . '(.*?)' . preg_quote($end) . '/',$str,$matches)) {
return $matches[1];
}
// no matches
return false;
}
?>
Enjoy
da (dot) blayde (a t) gmail (dot) com
19-Jul-2006 10:52
Sometimes when converting integers to strings, it looks better to have the number spelled out. I wrote this function that converts integers from -999 to 999 into spelled out strings:
function int2str($int=0){
$doOnes=true;
$neg=$int<0?true:false;
$int=abs(round($int));
$str='';
switch(strlen($int)){
case 1:$int='0'.$int;
case 2:$int='0'.$int;
case 3:$int.='';break;
default:return $int;
}
switch($int{0}){
case 1:$str.='one-hundred-';break;
case 2:$str.='two-hundred-';break;
case 3:$str.='three-hundred-';break;
case 4:$str.='four-hundred-';break;
case 5:$str.='five-hundred-';break;
case 6:$str.='six-hundred-';break;
case 7:$str.='seven-hundred-';break;
case 8:$str.='eight-hundred-';break;
case 9:$str.='nine-hundred-';break;
}
switch($int{1}){
case 1:
switch($int{2}){
case 0:$str.='ten-';break;
case 1:$str.='eleven-';break;
case 2:$str.='twelve-';break;
case 3:$str.='thirteen-';break;
case 4:$str.='fourteen-';break;
case 5:$str.='fifteen-';break;
case 6:$str.='sixteen-';break;
case 7:$str.='seventeen-';break;
case 8:$str.='eighteen-';break;
case 9:$str.='nineteen-';break;
}
$doOnes=false;
break;
case 2:$str.='twenty-';break;
case 3:$str.='thirty-';break;
case 4:$str.='forty-';break;
case 5:$str.='fifty-';break;
case 6:$str.='sixty-';break;
case 7:$str.='seventy-';break;
case 8:$str.='eighty-';break;
case 9:$str.='ninety-';break;
}
if($doOnes){
switch($int{2}){
case 1:$str.='one-';break;
case 2:$str.='two-';break;
case 3:$str.='three-';break;
case 4:$str.='four-';break;
case 5:$str.='five-';break;
case 6:$str.='six-';break;
case 7:$str.='seven-';break;
case 8:$str.='eight-';break;
case 9:$str.='nine-';break;
}}
$str=substr($str,0,-1);
if($neg){
$str='negative '.$str;
}
if($int=='000'){
$str='zero';
}
return $str;
}
Hope this helps someone,
-Blayde
mickycole at hotmail dot com
19-Jul-2006 12:01
In responce to James Baker's sencence case function.
Great function however i would make one slight variation being that it doesn't take into account the fact that a capital is required after a new paragraph so i modified it to check for /r and /n as follows:
<?PHP
/*/ Author : James Baker /*/
function sentenceCase($s){
$str = strtolower($s);
$cap = true;
for($x = 0; $x < strlen($str); $x++){
$letter = substr($str, $x, 1);
if($letter == "." || $letter == "!" || $letter == "?" || $letter == "\n" || $letter == "\r"){
$cap = true;
}elseif($letter != " " && $cap == true){
$letter = strtoupper($letter);
$cap = false;
}
$ret .= $letter;
}
return $ret;
}
?>
administrador(ensaimada)sphoera(punt)com
02-Mar-2006 06:10
I've prepared this simple function to obtain a string delimited between tags (not only XML tags!). Anybody needs something like this?.
<?php
function get_string_between($string, $start, $end){
$string = " ".$string;
$ini = strpos($string,$start);
if ($ini == 0) return "";
$ini += strlen($start);
$len = strpos($string,$end,$ini) - $ini;
return substr($string,$ini,$len);
}
$string = "this [custom] function is useless!!";
echo get_string_between($string,"[","]");
// must return "custom";
?>
more functions at http://www.sphoera.com
SteveRusin
24-Feb-2006 11:00
The functions below:
function beginsWith( $str, $sub )
function endsWith( $str, $sub )
Are correct, but flawed. You'd need to use the === operator instead:
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) === $sub );
}
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) === $sub );
}
Otherwise, endsWith would return "foobar.0" ends with ".0" as well as "0" or "00" or any amount of zeros because numerically .0 does equal 0.
navarr at gmail dot com
20-Dec-2005 06:24
stripos for PHP4.x
<?php
function stripos($haystack,$needle) {
return strpos(strtoupper($haystack),strtoupper($needle));
}
?>
dkflbk at nm dot ru
11-Dec-2005 08:58
I needed str2bin() function for one of my project, so if some one else is want to use it, have fun :)
<?php
/**
* Returns an ASCII string containing
* the binary representation of the input data .
**/
function str2bin($str, $mode=0) {
$out = false;
for($a=0; $a < strlen($str); $a++) {
$dec = ord(substr($str,$a,1));
$bin = '';
for($i=7; $i>=0; $i--) {
if ( $dec >= pow(2, $i) ) {
$bin .= "1";
$dec -= pow(2, $i);
} else {
$bin .= "0";
}
}
/* Default-mode */
if ( $mode == 0 ) $out .= $bin;
/* Human-mode (easy to read) */
if ( $mode == 1 ) $out .= $bin . " ";
/* Array-mode (easy to use) */
if ( $mode == 2 ) $out[$a] = $bin;
}
return $out;
}
?>
admin at fivestarbuy dot com
21-Oct-2005 09:18
This example lets you parse an unparsed strings variables. Warning: This could cause security leaks if you allow users to pass $variables through this engine. I recommend only using this for your Content Management System.
<?
$mytime=time();
$mydog="My Dog Ate My PHP!";
# Your Parsing String:
$s1 = 'Hyphen Variable Preserving: $mytime, and $mydog';
echo "Before: <br><br>$s1<br><br>";
# Remember, wherever you define this, it will not be defined GLOBAL into the function
# which is why we define it here. Defining it global could lead to security issues.
$vardata=get_defined_vars();
# Parse the string
$s1 = StrParse($s1,$vardata);
echo "After: <br><br>$s1";
function StrParse($str,$vardata) {
# Takes a string, or piece of data, that contains PHP Variables
# For example, unparsed variables like: Test using time: $mytime
# This example shows $mytime, and not the actual variable value.
# The end result shows the actual variable value of $mytime.
# This is useful for building a content management system,
# and directing your variables into your content data,
# where content is stored in a file or database, unparsed.
# Of course this could slow down page loads, but it's a good way
# to parse data from current variables into your loaded new data
# making it compatible.
# Then the variables are replaced with the actual variable..
$getvarkeys=array_keys($vardata);
$ret=$str;
for ($x=0; $x < count($getvarkeys); $x++) {
$myvar=$getvarkeys[$x];
#echo "Variable: " . $myvar . " [" . $vardata[$myvar] . "]<br>";
$ret=str_replace('$' . $myvar, $vardata[$myvar], $ret);
}
return $ret;
}
?>
17-Oct-2005 03:27
to: james dot d dot baker at gmail dot com
PHP has a builtin function for doing what your function does,
http://php.net/ucfirst
http://php.net/ucwords
14-Oct-2005 08:24
Updated; used to test for input as an array, should have been a string, added some validation of the input while I was at it. Enjoy.
<?php
/*---------- Directory Tree to Array ----------//
Takes base directory, returns an associative array
containing each directory name as an associative key
and each file as an indexed entry in the appropriate
directory.
If no path is provided, it uses the current directory
If $style == 1, it will return a sorted, non-associative
array
By Peter Dolan
www.peterd.net
Updated 2005-10-12
Use it as much as you like for whatever
For my own entertainment, please let me know if you do
//-----------------------------------------------------------*/
function dirTreeToArray( $path = "./", $style="0" ) {
if ( !is_string($path) or !($style==0 or $style==1) ) die("Improper arguments in function dirTreeToArray(string \$path, \$style = {0, 1})");
else {
$path = trim($path);
$path = str_replace("\\", "/", $path);
if( '/' == $path{strlen($path)-1} || '\'' == $path{strlen($path)-1} ) $path = substr($path, 0, strlen($path)-1);
}
$tree = array();
$arrayPointer = & $tree;
if ( $handle = opendir($path) ) {
while ( $fileName = readdir($handle) ) {
if ( $fileName != "." and $fileName != ".." ) {
$newPath = "$path/$fileName"; // Used for testing directory or file property
if ( is_dir($newPath) ) {
$dummyPointer = & $arrayPointer; // Save the current pointer
if ( $style == 0 ) $arrayPointer = & $arrayPointer[$fileName]; // Drop the pointer into a subdirectory
elseif ( $style == 1 ) $arrayPointer = & $arrayPointer[]; // Drop the pointer into a subdirectory
$arrayPointer = dirTreeToArray($newPath, $style); // Process the new subdirectory
if ( $style == 1 ) sort($arrayPointer); // Sort it if we're in a non-associative mode
$arrayPointer = & $dummyPointer; // Bring the pointer back up a level
}
elseif ( is_file($newPath) ) $arrayPointer[] = $fileName; // Enter the files
}
}
return $tree;
}
else die("Failed to open directory $path in function dirTreeToArray(string \$path, \$style = {0, 1})");
}
?>
tim_meredith at s4s dot org
13-Oct-2005 01:32
--Convert MSWord Quotes--
Use this before any conversion to HTML entities or characters to clean up a form entry cut and pasted from MSWord.
function fixword($scratch)
{
$start=chr(226).chr(128);
$word=array();$fixword=array();
$word[]=$start.chr(152);$fixword[]="'";
$word[]=$start.chr(153);$fixword[]="'";
$word[]=$start.chr(156);$fixword[]="\"";
$word[]=$start.chr(157);$fixword[]="\"";
return str_replace($word, $fixword, $scratch);
}
webmaster at cafe-clope dot net
13-Aug-2005 04:40
A comprehensive concatenation function, that works with array and strings
<?php
function str_cat() {
$args = func_get_args() ;
// Asserts that every array given as argument is $dim-size.
// Keys in arrays are stripped off.
// If no array is found, $dim stays unset.
foreach($args as $key => $arg) {
if(is_array($arg)) {
if(!isset($dim))
$dim = count($arg) ;
elseif($dim != count($arg))
return FALSE ;
$args[$key] = array_values($arg) ;
}
}
// Concatenation
if(isset($dim)) {
$result = array() ;
for($i=0;$i<$dim;$i++) {
$result[$i] = '' ;
foreach($args as $arg)
$result[$i] .= ( is_array($arg) ? $arg[$i] : $arg ) ;
}
return $result ;
} else {
return implode($args) ;
}
}
?>
A simple example :
<?php
str_cat(array(1,2,3), '-', array('foo' => 'foo', 'bar' => 'bar', 'noop' => 'noop')) ;
?>
will return :
Array (
[0] => 1-foo
[1] => 2-bar
[2] => 3-noop
)
More usefull :
<?php
$myget = $_GET ; // retrieving previous $_GET values
$myget['foo'] = 'b a r' ; // changing one value
$myget = str_cat(array_keys($myget), '=', array_map('rawurlencode', array_values($myget))) ;
$querystring = implode(ini_get('arg_separator.output'), $myget)) ;
?>
will return a valid querystring with some values changed.
Note that <?php str_cat('foo', '&', 'bar') ; ?> will return 'foo&bar', while <?php str_cat(array('foo'), '&', 'bar') ; ?> will return array(0 => foo&bar)
t0russ at gmail dot com
14-Jun-2005 10:38
to kristin at greenaple dot on dot ca:
thanx for sharing.
your function in recursive form proved to be slightly faster and it returns false (as it should) when the character is not found instead of number 0:
<?php
function strnposr($haystack, $needle, $occurance, $pos = 0) {
return ($occurance<2)?strpos($haystack, $needle, $pos):strnposr($haystack,$needle,$occurance-1,strpos($haystack, $needle, $pos) + 1);
}
?>
rh at richardhoward dot net
05-Jun-2005 11:41
<?php
/**
Utility class: static methods for cleaning & escaping untrusted (i.e.
user-supplied) strings.
Any string can (usually) be thought of as being in one of these 'modes':
pure = what the user actually typed / what you want to see on the page /
what is actually stored in the DB
gpc = incoming GET, POST or COOKIE data
sql = escaped for passing safely to RDBMS via SQL (also, data from DB
queries and file reads if you have magic_quotes_runtime on--which
is rare)
html = safe for html display (htmlentities applied)
Always knowing what mode your string is in--using these methods to
convert between modes--will prevent SQL injection and cross-site scripting.
This class refers to its own namespace (so it can work in PHP 4--there is no
self keyword until PHP 5). Do not change the name of the class w/o changing
all the internal references.
Example usage: a POST value that you want to query with:
$username = Str::gpc2sql($_POST['username']);
*/
//This sets SQL escaping to use slashes; for Sybase(/MSSQL)-style escaping
// ( ' --> '' ), set to true.
define('STR_SYBASE', false);
class Str {
function gpc2sql($gpc, $maxLength = false)
{
return Str::pure2sql(Str::gpc2pure($gpc), $maxLength);
}
function gpc2html($gpc, $maxLength = false)
{
return Str::pure2html(Str::gpc2pure($gpc), $maxLength);
}
function gpc2pure($gpc)
{
if (ini_get('magic_quotes_sybase'))
$pure = str_replace("''", "'", $gpc);
else $pure = get_magic_quotes_gpc() ? stripslashes($gpc) : $gpc;
return $pure;
}
function html2pure($html)
{
return html_entity_decode($html);
}
function html2sql($html, $maxLength = false)
{
return Str::pure2sql(Str::html2pure($html), $maxLength);
}
function pure2html($pure, $maxLength = false)
{
return $maxLength ? htmlentities(substr($pure, 0, $maxLength))
: htmlentities($pure);
}
function pure2sql($pure, $maxLength = false)
{
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return (STR_SYBASE)
? str_replace("'", "''", $pure)
: addslashes($pure);
}
function sql2html($sql, $maxLength = false)
{
$pure = Str::sql2pure($sql);
if ($maxLength) $pure = substr($pure, 0, $maxLength);
return Str::pure2html($pure);
}
function sql2pure($sql)
{
return (STR_SYBASE)
? str_replace("''", "'", $sql)
: stripslashes($sql);
}
}
?>
james dot d dot baker at gmail dot com
27-May-2005 10:45
<?php
/*
Written By James Baker, May 27th 2005
sentenceCase($string);
$string: The string to convert to sentence case.
Converts a string into proper sentence case (First letter of each sentance capital, all the others smaller)
Example Usage:
echo sentenceCase("HELLO WORLD!!! THIS IS A CAPITALISED SENTENCE. this isn't.");
Returns:
Hello world!!! This is a capitalised sentence. This isn't.
*/
function sentenceCase($s){
$str = strtolower($s);
$cap = true;
for($x = 0; $x < strlen($str); $x++){
$letter = substr($str, $x, 1);
if($letter == "." || $letter == "!" || $letter == "?"){
$cap = true;
}elseif($letter != " " && $cap == true){
$letter = strtoupper($letter);
$cap = false;
}
$ret .= $letter;
}
return $ret;
}
?>
php at moechofe dot com
26-Apr-2005 06:34
<?php
/*
* str_match
*
* return a string with only cacacteres defined in a expression return false if the expression is not valid
*
* @param $str string the string
* @param $match the expression based on the class definition off a PCRE regular expression.
* the '[', ']', '\' and '^' at class start need to be escaped.
* like : -a-z0-9_@.
*/
function str_match( $str, $match )
{
$return = '';
if( eregi( '(.*)', $match, $class ) )
{
$match = '['.$regs[1].']';
for( $i=0; $i<strlen($str); $i++ )
if( ereg( '['.$class[1].']', $str[$i] ) )
$return .= $str{$i};
return $return;
}
else return false;
}
/*
* example
* accept only alphanum caracteres from the GET/POST parameters 'a'
*/
if( ! empty($_REQUEST['a']) )
$_REQUEST['a'] = str_match( $_REQUEST['a'], 'a-zA-Z0-9' );
else
$_REQUEST['a'] = 'default';
?>
Pommef
19-Mar-2005 01:15
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
function strnpos($haystack, $needle, $occurance, $pos = 0) {
$res = implode($needle,$haystack);
$res = array_slice($res, $pos, $occurance);
return explode ($needle,$res);
}
?>
kristin at greenapple dot on dot ca
02-Jan-2005 08:32
I really searched for a function that would do this as I've seen it in other languages but I couldn't find it here. This is particularily useful when combined with substr() to take the first part of a string up to a certain point.
strnpos() - Find the nth position of needle in haystack.
<?php
function strnpos($haystack, $needle, $occurance, $pos = 0) {
for ($i = 1; $i <= $occurance; $i++) {
$pos = strpos($haystack, $needle, $pos) + 1;
}
return $pos - 1;
}
?>
Example: Give me everything up to the fourth occurance of '/'.
<?php
$haystack = "/home/username/www/index.php";
$needle = "/";
$root_dir = substr($haystack, 0, strnpos($haystack, $needle, 4));
echo $root_dir;
?>
Returns: /home/username/www
Use this example with the server variable $_SERVER['SCRIPT_NAME'] as the haystack and you can self-discover a document's root directory for the purposes of locating global files automatically!
20-Dec-2004 08:31
In response to hackajar <matt> yahoo <trot> com,
No string-to-array function exists because it is not needed. If you reference a string with an offset like you do with an array, the character at that offset will be return. This is documented in section III.11's "Strings" article under the "String access and modification by character" heading.
andy a t onesandzeros d o t biz
09-Nov-2004 02:54
I use these little doo-dads quite a bit. I just thought I'd share them and maybe save someone a little time. No biggy. :)
// returns true if $str begins with $sub
function beginsWith( $str, $sub ) {
return ( substr( $str, 0, strlen( $sub ) ) == $sub );
}
// return tru if $str ends with $sub
function endsWith( $str, $sub ) {
return ( substr( $str, strlen( $str ) - strlen( $sub ) ) == $sub );
}
// trims off x chars from the front of a string
// or the matching string in $off is trimmed off
function trimOffFront( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, $off );
else
return substr( $str, strlen( $off ) );
}
// trims off x chars from the end of a string
// or the matching string in $off is trimmed off
function trimOffEnd( $off, $str ) {
if( is_numeric( $off ) )
return substr( $str, 0, strlen( $str ) - $off );
else
return substr( $str, 0, strlen( $str ) - strlen( $off ) );
}
[tab!]
27-Oct-2004 12:29
//
// string strtrmvistl( string str, [int maxlen = 64],
// [bool right_justify = false],
// [string delimter = "<br>\n"])
//
// splits a long string into two chunks (a start and an end chunk)
// of a given maximum length and seperates them by a given delimeter.
// a second chunk can be right-justified within maxlen.
// may be used to 'spread' a string over two lines.
//
function strtrmvistl($str, $maxlen = 64, $right_justify = false, $delimter = "<br>\n") {
if(($len = strlen($str = chop($str))) > ($maxlen = max($maxlen, 12))) {
$newstr = substr($str, 0, $maxlen - 3);
if($len > ($maxlen - 3)) {
$endlen = min(($len - strlen($newstr)), $maxlen - 3);
$newstr .= "..." . $delimter;
if($right_justify)
$newstr .= str_pad('', $maxlen - $endlen - 3, ' ');
$newstr .= "..." . substr($str, $len - $endlen);
}
return($newstr);
}
return($str);
}
terry dot greenlaw at logicalshift dot com
11-Aug-2004 10:52
Here's a simpler "simplest" way to toggle through a set of 1..n colors for web backgrounds:
<?php
$colours = array('#000000', '#808080', '#A0A0A0', '#FFFFFF');
// Get a colour
$color = next($colors) or $color = reset($colors);
?>
The code doesn't need to know anything about the number of elements being cycled through. That way you won't have to tracking down all the code when changing the number of colors or the color values.