Phar::apiVersion

[edit] Last updated: Mon, 01 Nov 2010

CXXI. Phar archive stream and classes

Einführung

The phar extension provides the phar stream wrapper and the Phar class for manipulating self-contained PHP Archive (phar) files. The Phar class can be used to create and to extract contents of phar files as well as iterating over their contents.

PHP Archive files (Phars) are special collections of files that can be transparently run right out of the file, similar to Java's jar archive files. Using a phar archive, it is possible to distribute a complete PHP application in a single file that will run out of the file without modification or extraction. Phar archives can also be used to store files for extraction similar to tar or zip archive files. Phars support compression using gzip if the zlib extension is present, and using bzip2 if the bz2 extension is present. In addition, iteration and other features are available if the SPL extension is available. Phar signature verification using md5 or sha1 is natively supported if the hash extension is available.

The original implementation for Phar archives was in the PEAR package » PHP_Archive, and the implementation details are very similar.

Anforderungen

Phar requires PHP 5.2.1 or newer. Additional features require the SPL extension in order to take advantage of iteration and array access to a Phar's file contents. The phar stream does not require any additional extensions to function.

You may optionally wish to enable the zlib and bzip2 extensions to take advantage of compressed phar support. In addition, the hash extension can be used for signing phars and verifying integrity.

Installation

Windows binaries may be found at » http://snaps.php.net/. To install, download php_phar.dll to the folder specified by your php.ini file's extension_dir directive. Enable it by adding extension=php_phar.dll to your php.ini and restarting your webserver.


extension_dir=c:/php5/exts/
extension=php_phar.dll

Linux, BSD, and other *nix variants can be compiled using the following steps:

Either:
- Run the pear installer for PECL/phar: pecl install phar
- Copy phar.so from the directory indicated by the build process to the location specified in your php.ini file under extension_dir.
- Add extension=phar.so to your php.ini
Or:
- Set the path to your php.ini via:
  pecl config-set php_ini /path/to/php.ini
- Run the pear installer for PECL/phar: pecl install phar
Restart your webserver to reload your php.ini settings.

Development Versions: There are currently no stable versions of PECL/phar, to force installation of the alpha version of PECL/phar execute: pecl install phar-alpha

Compiling PECL/phar without using the PEAR command

Rather than using pecl install phar to automatically download and install PECL/phar, you may download the tarball from » PECL. From the root of the unpacked tarball, run: phpize && ./configure --enable-phar && make to generate phar.so. Once built, continue the installation from step 4 above.

Zusätzliche Informationen, wie neue Releases, Downloads Quelldateien, Maintainerinformation und ein CHANGELOG finden Sie hier: » http://pecl.php.net/package/phar.

Laufzeit Konfiguration

Das Verhalten dieser Funktionen wird durch Einstellungen in der php.ini beeinflusst.

Tabelle 210. Filesystem and Streams Configuration Options

Name	Default	Changeable	Changelog
phar.readonly	"1"	PHP_INI_SYSTEM	Available Since version 1.0.0
phar.require_hash	"0"	PHP_INI_SYSTEM disable/enable, PHP_INI_ALL enable	Available Since version 1.0.0

Hier eine kurze Erklärung der Konfigurationsoptionen:

phar.readonly boolean: This option disables creation or modification of Phar archives using the phar stream or Phar object's write support. This setting should always be enabled on production machines, as the phar extension's convenient write support could allow straightforward creation of a php-based virus when coupled with other common security vulnerabilities.
Anmerkung: This setting can only be set in php.ini due to security reasons.
phar.require_hash boolean: This option will force all opened Phar archives to contain some kind of signature (currently md5 and sha1 are supported), and will refuse to process any Phar archive that does not contain a signature.
Anmerkung: The option can be disabled in the system level only, but can be enabled using ini_set() in a user script regardless of the system setting.

Resource Typen

The Phar extension provides the phar stream, which allows accessing files contained within a phar transparently. The file format of a Phar is described here

Vordefinierte Klassen

Phar

PharFileInfo

PharException

Using Phar Archives: Introduction

Phar archives are similar in concept to Java JAR archives, but are tailored to the needs and to the flexibility of PHP applications. A Phar archive is used to distribute a complete PHP application or library in a single file. Unlike Java's implementation of JAR archives, no external tool is required to process or run a PHP Phar archive. A Phar archive application is processed exactly like any other PHP application:

  
php coolapplication.phar

Using a Phar archive library is identical to using any other PHP library:


<?php

include 'coollibrary.phar';

?>

What makes Phar archives incredibly useful is the phar stream wrapper, which is explained in depth here. Using this stream wrapper, it is possible to access individual files within a phar as if the phar were its own filesystem. The phar stream wrapper supports all read/write operations on files, and opendir() on directories.


<?php

include 'phar://coollibrary.phar/internal/file.php';

header('Content-type: image/jpeg');

// phars can be accessed by full path or by alias

echo file_get_contents('phar:///fullpath/to/coollibrary.phar/images/wow.jpg');

?>

Also provided with the Phar extension is the Phar class, which allows accessing the files of the Phar archive as if it were an associative array, and other functionality. The Phar class is explained here.


<?php

try {

    // open an existing phar

    $p = new Phar('coollibrary.phar');

    foreach ($p as $file) {

        // $file is a PharFileInfo class, and inherits from SplFileInfo

        echo $file->getFileName() . "\n";

        echo $file . "\n"; // display contents;

    }

    if (isset($p['internal/file.php'])) {

        var_dump($p['internal/file.php']->getMetaData());

    }



    // create a new phar - phar.readonly must be 0 in php.ini

    // phar.readonly is enabled by default for security reasons.

    // On production servers, Phars need never be created,

    // only executed.

    if (Phar::canWrite()) {

        $p = new Phar(dirname(__FILE__) . '/newphar.phar', 0, 'newphar.phar');

        // create transaction - nothing is written to disk until commit() is called

        $p->begin();

        // add a new file, set its contents

        $p['file1.txt'] = 'Information';

        $fp = fopen('hugefile.dat', 'rb');

        // copy from the stream

        $p['data/hugefile.dat'] = $fp;

        if (Phar::canCompress()) {

            $p['data/hugefile.dat']->setCompressedGZ();

        }

        $p['images/wow.jpg'] = file_get_contents('images/wow.jpg');

        // any value can be saved as file-specific meta-data

        $p['images/wow.jpg']->setMetaData(array('mime-type' => 'image/jpeg'));

        $p['index.php'] = file_get_contents('index.php');

        $p->setMetaData(array('bootstrap' => 'index.php'));

        // save the Phar, and set the loader stub

        $p->commit('<?php

$p = new Phar(__FILE__);

$m = $p->getMetaData();

require "phar://" . __FILE__ . "/" . $m["bootstrap"];

__HALT_COMPILER();');

    }

} catch (BadMethodCallException $e) {

    echo 'Could not open Phar: ', $e;

}

?>

Using Phar Archives: the phar stream wrapper

The Phar stream wrapper fully supports fopen() for read, write or append, unlink(), stat(), fstat(), fseek(), rename() and directory stream operation opendir(). The Phar stream wrapper does not support creating or erasing a directory, as files are stored only as files, and the concept of an abstract directory does not exist.

Individual file compression and per-file metadata can also be manipulated in a Phar archive using stream contexts:


<?php

$context = stream_context_create(array('phar' =>

                                    array('compression' => Phar::GZ)),

                                    array('metadata' => array('user' => 'cellog')));

file_put_contents('phar://my.phar/somefile.php', 0, $context);

?>

The phar stream wrapper does not operate on remote files, and cannot operate on remote files, and so is allowed even when the allow_url_fopen INI option is disabled.

Although it is possible to create phar archives from scratch just using stream operations, it is best to use the functionality built into the Phar class. The stream wrapper is best used for read operations.

Using Phar Archives: the Phar class

The Phar class supports reading and manipulation of Phar archives, as well as iteration through inherited functionality of the » RecursiveDirectoryIterator class. With support for the ArrayAccess interface, files inside a Phar archive can be accessed as if they were part of an associative array.

Assuming that $p is a Phar object initialized as follows:


<?php

$p = new Phar('myphar.phar');

?>

The following is possible:

$a = $p['file.php'] creates a PharFileInfo class that refers to the contents of phar://myphar.phar/file.php
$p['file.php'] = $v creates a new file (phar://myphar.phar/file.php), or overwrites an existing file within myphar.phar. $v can be either a string or an open file pointer, in which case the entire contents of the file will be used to create the new file.
isset($p['file.php']) can be used to determine whether phar://myphar.phar/file.php exists within myphar.phar.
unset($p['file.php']) erases phar://myphar.phar/file.php from myphar.phar.

In addition, the Phar object is the only way to access Phar-specific metadata, through Phar->getMetaData(), and the only way to set or retrieve a Phar archive's PHP loader stub through Phar->getStub() and Phar->setStub(). Additionally, compression for the entire Phar archive at once can only be manipulated using the Phar class.

The full list of Phar object functionality is documented below.

The PharFileInfo class extends the » SplFileInfo class, and adds several methods for manipulating Phar-specific details of a file contained within a Phar, such as manipulating compression and metadata.

Phar file format

All Phar files contain three to four sections:

a stub
a manifest describing the contents
the file contents
[optional] a signature for verifying Phar integrity

Phar file stub

A Phar's stub is a simple PHP file. The smallest possible stub follows:


<?php __HALT_COMPILER();

A stub must contain as a minimum, the __HALT_COMPILER(); token at its conclusion. Typically, a stub will contain loader functionality like so:


<?php

Phar::mapPhar();

include 'phar://myphar.phar/index.php';

__HALT_COMPILER();

There are no restrictions on the contents of a Phar stub, except for the requirement that it conclude with __HALT_COMPILER();. The closing PHP tag ?> may be included or omitted, but there can be no more than 1 space between the ; and the close tag ?> or the phar extension will be unable to process the Phar archive.

Phar Manifest Format

The Phar manifest is a highly optimized format that allows per-file specification of file compression, file permissions, and even user-defined meta-data such as user or group. All values greater than 1 byte are stored in little-endian byte order, with the exception of the API version, which for historical reasons is stored as 3 nibbles in big-endian order.

All unused flags are reserved for future use, and must not be used to store custom information. Use the per-file meta-data facility to store customized information about particular files.

The basic file format of a Phar archive manifest is as follows:

Tabelle 211. Global Phar manifest format

Size in bytes	Description
4 bytes	Length of manifest in bytes (1 MB limit)
4 bytes	Number of files in the Phar
2 bytes	API version of the Phar manifest (currently 0.9.0)
4 bytes	Global Phar bitmapped flags
4 bytes	Length of Phar alias
??	Phar alias (length based on previous)
4 bytes	Length of Phar metadata (`0` for none)
??	Serialized Phar Meta-data, stored in serialize() format
at least 24 * number of entries bytes	entries for each file

Global Phar bitmapped flags

Here are the bitmapped flags currently recognized by the Phar extension for the global Phar flat bitmap:

Tabelle 212. Bitmap values recognized

Value	Description
`0x00010000`	If set, this Phar contains a verification signature
`0x00001000`	If set, this Phar contains at least 1 file that is compressed with zlib compression
`0x00002000`	If set, this Phar contains at least 1 file that is compressed with bzip compression

Phar manifest file entry definition

Each file in the manifest contains the following information:

Tabelle 213. Phar Manifest file entry

Size in bytes	Description
4 bytes	Filename length in bytes
??	Filename (length specified in previous)
4 bytes	Un-compressed file size in bytes
4 bytes	Unix timestamp of file
4 bytes	Compressed file size in bytes
4 bytes	CRC32 checksum of un-compressed file contents
4 bytes	Bit-mapped File-specific flags
4 bytes	Serialized File Meta-data length (`0` for none)
??	Serialized File Meta-data, stored in serialize() format

The File-specific bitmap values recognized are:

Tabelle 214. Bitmap values recognized

Value	Description
`0x000001FF`	These bits are reserved for defining specific file permissions of a file. Permissions are used for fstat() and can be used to recreate desired permissions upon extraction.
`0x00001000`	If set, this Phar contains at least 1 file that is compressed with zlib compression
`0x00002000`	If set, this Phar contains at least 1 file that is compressed with bzip compression

Phar Signature format

Phars containing a signature always have the signature

Tabelle 215. Signature format

Length in bytes	Description
16 or 20 bytes	The actual signature, 20 bytes for an SHA1 signature, 16 bytes for an MD5 signature.
4 bytes	Signature flags. `0x0001` is used to define an MD5 signature, and `0x0002` is used to define an SHA1 signature.
4 bytes	Magic "GBMB" used to define the presence of a signature.

Inhaltsverzeichnis

Phar::apiVersion — Returns the api version
Phar->begin — Begin a Phar modification transaction
Phar::canCompress — Returns whether phar extension supports compression using either zlib or bzip2
Phar::canWrite — Returns whether phar extension supports writing and creating phars
Phar->commit — End a Phar modification transaction by writing the Phar archive to disk
Phar->compressAllFilesBZIP2 — Compresses all files in the current Phar archive using Bzip2 compression
Phar->compressAllFilesGZ — Compresses all files in the current Phar archive using Gzip compression
Phar::__construct — Construct a Phar archive object
Phar->count — Returns the number of entries (files) in the Phar archive
Phar->getMetaData — Returns phar archive meta-data
Phar->getModified — Return whether phar was modified
Phar->getSignature — Return MD5/SHA1 signature of a Phar archive
Phar->getStub — Return the PHP loader or bootstrap stub of a Phar archive
Phar->getVersion — Return version info of Phar archive
Phar->isFlushingToPhar — Used to determine whether a Phar creation transaction is active
Phar::loadPhar — Loads any phar archive with an alias
Phar::mapPhar — Reads the currently executed file (a phar) and registers its manifest
Phar::offsetExists — determines whether a file exists in the phar
Phar::offsetGet — get a PharFileInfo object for a specific file
Phar::offsetSet — set the contents of an internal file to those of an external file
Phar::offsetUnset — remove a file from a phar
Phar->setMetaData — Sets phar archive meta-data
Phar->setStub — Used to set the PHP loader or bootstrap stub of a Phar archive
Phar->uncompressAllFiles — Uncompresses all files in the current Phar archive
PharFileInfo::__construct — Construct a Phar entry object
PharFileInfo->getCompressedSize — Returns the actual size of the file (with compression) inside the Phar archive
PharFileInfo->getCRC32 — Returns CRC32 code or throws an exception if not CRC checked
PharFileInfo->getMetaData — Returns file-specific meta-data saved with a file
PharFileInfo->getPharFlags — Returns the Phar file entry flags
PharFileInfo->isCompressed — Returns whether the entry is compressed
PharFileInfo->isCompressedBZIP2 — Returns whether the entry is compressed using bzip2
PharFileInfo->isCompressedGZ — Returns whether the entry is compressed using gz
PharFileInfo->isCRCChecked — Returns whether file entry has had its CRC verified
PharFileInfo->setCompressedBZIP2 — Compresses the current Phar entry within the phar using Bzip2 compression
PharFileInfo->setCompressedGZ — Compresses the current Phar entry within the phar using gz compression
PharFileInfo->setMetaData — Sets file-specific meta-data saved with a file
PharFileInfo->setUncompressed — Uncompresses the current Phar entry within the phar, if it is compressed

add a note User Contributed Notes Phar archive stream and classes

There are no user contributed notes for this page.